Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Ford Focus Titanium, 4D Hatchback, Automatic DCT Trans, Gas/EthanolFACTORY OEM SERVICE PROCEDURE
HVAC Module DTC Table
DTC DESCRIPTION
| DTC | Description | Action |
|---|---|---|
| B105A:00 | Cabin Temperature Sensor Fan: No Sub Type Information | GO to PINPOINT TEST P |
| B1081:00 | Left Temperature Damper Motor: No Sub Type Information | GO to PINPOINT TEST K |
| B1082:00 | Right Temperature Damper Motor: No Sub Type Information | GO to PINPOINT TEST L |
| B1083:00 | Recirculation Damper Motor: No Sub Type Information | GO to PINPOINT TEST E |
| B1085:00 | Defroster Damper Motor: No Sub Type Information | GO to PINPOINT TEST F |
| B1086:00 | Air Distribution Damper Motor: No Sub Type Information | GO to PINPOINT TEST F |
| B10B3:00 | Right Panel Air Discharge Temperature: No Sub Type Information | GO to PINPOINT TEST O |
| B10B4:00 | Right Floor Air Discharge Temperature: No Sub Type Information | GO to PINPOINT TEST O |
| B10B5:00 | Left Panel Air Discharge Temperature: No Sub Type Information | GO to PINPOINT TEST O |
| B10B6:00 | Left Floor Air Discharge Temperature: No Sub Type Information | GO to PINPOINT TEST O |
| B10B8:00 | Push Buttons: No Sub Type Information | INSTALL a new HVAC control module. REFER to: HEATING, VENTILATION AND AIR CONDITIONING (HVAC) CONTROL MODULE . |
| B10B9:00 | Blower Control: No Sub Type Information |
|
| B1A61:00 | Cabin Temperature Sensor: No Sub Type Information | GO to PINPOINT TEST P |
| B1A63:00 | Right Solar Sensor: No Sub Type Information | GO to PINPOINT TEST Q |
| B1A64:00 | Left Solar Sensor: No Sub Type Information | GO to PINPOINT TEST Q |
| B1A69:00 | Humidity Sensor: No Sub Type Information | GO to PINPOINT TEST P |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST C |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to PINPOINT TEST S |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the BCM . REFER to: BODY CONTROL MODULE (BCM) . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CHECK vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect Programmable Module Installation (PMI) procedures. If there have been recent service actions with this module, REPEAT/PERFORM the Programmable Module Installation (PMI) procedure as directed by the scan tool. If there have been no recent service actions, INSTALL a new HVAC control module. REFER to: HEATING, VENTILATION AND AIR CONDITIONING (HVAC) CONTROL MODULE . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | CHECK vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect Programmable Module Installation (PMI) procedures. If there have been recent service actions with this module, REPEAT/PERFORM the Programmable Module Installation (PMI) procedure as directed by the scan tool. If there have been no recent service actions, INSTALL a new HVAC control module. REFER to: HEATING, VENTILATION AND AIR CONDITIONING (HVAC) CONTROL MODULE . |
| U3000:00 | Control Module: No Sub Type Information | INSTALL a new HVAC control module. REFER to: HEATING, VENTILATION AND AIR CONDITIONING (HVAC) CONTROL MODULE . |
| U3006:16 | Control Module Input Power "A": Circuit Voltage Below Threshold | GO to PINPOINT TEST R |
| U3006:17 | Control Module Input Power "A": Circuit Voltage Above Threshold | GO to PINPOINT TEST R |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.