Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Ford Focus STFACTORY OEM SERVICE PROCEDURE
Section 189 (Climate Control System)
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Removal And Installation
- Air Conditioning - Exploded View
- Air Conditioning (A/C) Compressor - 3.7L
- Air Conditioning (A/C) Compressor - 5.0L and 5.8L
- Air Conditioning (A/C) Evaporator Discharge Air Temperature Sensor
- Air Conditioning (A/C) Pressure Relief Valve
- Ambient Air Temperature Sensor
- Blower Motor
- Blower Motor Speed Control
- Cabin Air Filter
- Clutch and Clutch Field Coil
- Compressor to Condenser Discharge Line
- Condenser Core
- Condenser to Evaporator Line
- Evaporator Outlet Line
- Heater Core
- Heater Core And Evaporator Core Housing
- Heating Ventilation Air Conditioning (HVAC) Module
- In-Vehicle Temperature Sensor
- Mode Door Actuator - Air Inlet Door
- Mode Door Actuator - Floor Door
- Mode Door Actuator - Panel/Defrost Door
- Plenum Chamber
- Receiver Drier
- Register - Center
- Register - RH
- Temperature Blend Door Actuator - LH
- Temperature Blend Door Actuator - RH
- Thermostatic Expansion Valve
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
