2014 Ford Flex SEFACTORY OEM SERVICE PROCEDURE

Steering Column Control Module (SCCM)

DTC INDEX

DTC Description Action
B1007:09 High-Beam Headlamp Switch: Component Failure REFER to EXTERIOR LIGHTING .
B1008:09 Wiper Mode Switch: Component Failure REFER to WIPERS AND WASHERS .
B1051:09 Front Washer Switch: Component Failure REFER to WIPERS AND WASHERS .
B1052:09 Rear Washer Switch: Component Failure REFER to WIPERS AND WASHERS .
B10A6:09 Main Light Switch: Component Failure REFER to EXTERIOR LIGHTING .
B10AD:02 Rain Sensor: General Signal Failure REFER to WIPERS AND WASHERS .
B10AD:08 Rain Sensor: Bus Signal/Message Failure REFER to WIPERS AND WASHERS .
B10AD:49 Rain Sensor: Internal Electronic Failure REFER to WIPERS AND WASHERS .
B10AD:55 Rain Sensor: Not Configured CARRY OUT PMI  using As-Built Data on the SCCM  . RETRIEVE SCCM  DTCs. If B10AD:55 returns, INSTALL a new SCCM  . REFER to STEERING COLUMN CONTROL MODULE (SCCM) .
B1124:09 Lamp Fade Control: Component Failure REFER to INSTRUMENT CLUSTER AND PANEL ILLUMINATION .
B1131:02 Wiper Motor Module: General Signal Failure REFER to WIPERS AND WASHERS .
B1131:08 Wiper Motor Module: Bus Signal/Message Failure REFER to WIPERS AND WASHERS .
B11D9:16 Vehicle Battery: Circuit Below Threshold GO to PINPOINT TEST M .
B11D9:17 Vehicle Battery: Circuit Above Threshold GO to PINPOINT TEST N .
B1298:09 Steering Column Adjust Up Switch: Component Failure REFER to STEERING COLUMN .
B1299:09 Steering Column Adjust Down Switch: Component Failure REFER to STEERING COLUMN .
B12A1:09 Steering Column Adjust Out Switch: Component Failure REFER to STEERING COLUMN .
B12A2:09 Steering Column Adjust In Switch: Component Failure REFER to STEERING COLUMN .
B12F7:09 Single Wipe Switch: Component Failure REFER to WIPERS AND WASHERS .
B1375:18 Steering Column Tilt Motor: Circuit Current Below Threshold REFER to STEERING COLUMN .
B1375:19 Steering Column Tilt Motor: Circuit Current Above Threshold REFER to STEERING COLUMN .
B1375:71 Steering Column Tilt Motor: Actuator Stuck REFER to STEERING COLUMN .
B137E:18 Steering Column Telescope Motor: Circuit Current Below Threshold REFER to STEERING COLUMN .
B137E:19 Steering Column Telescope Motor: Circuit Current Above Threshold REFER to STEERING COLUMN .
B137E:71 Steering Column Telescope Motor: Actuator Stuck REFER to STEERING COLUMN .
B137F:09 Steering Wheel Left Switch Pack: Component Failure REFER to CRUISE CONTROL - NON-ADAPTIVE or CRUISE CONTROL - ADAPTIVE .
B137F:11 Steering Wheel Left Switch Pack: Circuit Short to Ground REFER to CRUISE CONTROL - NON-ADAPTIVE or CRUISE CONTROL - ADAPTIVE .
B137F:17 Steering Wheel Left Switch Pack: Circuit Voltage Above Threshold REFER to CRUISE CONTROL - NON-ADAPTIVE or CRUISE CONTROL - ADAPTIVE .
B1380:09 Steering Wheel Right Switch Pack: Component Failure Refer to the appropriate Information and Entertainment Systems article for the procedure.
B1380:11 Steering Wheel Right Switch Pack: Circuit Short to Ground Refer to the appropriate Information and Entertainment Systems article for the procedure.
B1380:17 Steering Wheel Right Switch Pack: Circuit Voltage Above Threshold Refer to the appropriate Information and Entertainment Systems article for the procedure.
B1C33:11 Steering Column Tilt Feedback Signal: Circuit Short to Ground REFER to STEERING COLUMN .
B1C33:12 Steering Column Tilt Feedback Signal: Circuit Short to Battery REFER to STEERING COLUMN .
B1C35:11 Steering Column Telescope Feedback Signal: Circuit Short to Ground REFER to STEERING COLUMN .
B1C35:12 Steering Column Telescope Feedback Signal: Circuit Short to Battery REFER to STEERING COLUMN .
B1D36:09 Turn Indicator Switch: Component Failure REFER to EXTERIOR LIGHTING .
C0051:09 Steering Wheel Position Sensor: Component Failure INSTALL a new steering wheel rotation sensor. REFER to ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL .
C0051:16 Steering Wheel Position Sensor: Circuit Voltage Below Threshold GO to PINPOINT TEST L .
C0051:17 Steering Wheel Position Sensor: Circuit Voltage Above Threshold GO to PINPOINT TEST L .
U1000:00 Solid State Driver Protection Active-Driver Disabled: No Sub Type Information REPAIR all other SCCM  DTCs before addressing this concern.
U2100:00 Initial Configuration Not Complete: No Sub Type Information CARRY OUT PMI  using As-Built Data on the SCCM  . RETRIEVE SCCM  DTCs. If U2100:00 returns, INSTALL a new SCCM  . REFER to STEERING COLUMN CONTROL MODULE (SCCM) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information This DTC sets if the steering wheel switches do not match the switch function configuration data in the SCCM  . CHECK the part numbers in Ford Catalog Advantage™ or equivalent and CONFIRM that the correct SCCM  and steering wheel control switches are installed in the vehicle. INSTALL the correct components, as necessary.
U3000:49 Control Module: Internal Electronic Failure INSTALL a new SCCM  . REFER to STEERING COLUMN CONTROL MODULE (SCCM) .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.