2014 Ford Fiesta STFACTORY OEM SERVICE PROCEDURE

Information System And Entertainment System DTCS (Am/Fm/Cd/Sync/Touchscreen): APIM

DTC INDEX

DTC Description Action
B108E:01 Display: General Electrical Failure GO to PINPOINT TEST Y
B116A:01 Handset Microphone: General Electrical Failure GO to PINPOINT TEST Q
B11BA:1C Steering Wheel Audio Switch Pack: Circuit Voltage Out of Range GO to PINPOINT TEST W
B11BA:63 Steering Wheel Audio Switch Pack: Circuit/Component Protection Time-Out GO to PINPOINT TEST W
B1215:00 External Memory Card: No Sub Type Information GO to PINPOINT TEST Z
B1252:11 USB  Port: Circuit Short To Ground
B1252:13 USB  Port: Circuit Open
B12B8:11 USB  Port #2: Circuit Short To Ground
NOTE: This DTC  refers to USB  port #2 on the APIM  itself, which is not used.
  • INSPECT the APIM USB  port #2 for damage and REMOVE any debris.
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  B12B8:11 is retrieved again, PERFORM the APIM  Hardware Test. Refer to APIM HARDWARE TESTING .
C1001:01 Vision System Camera: General Electrical Failure REFER to: PARKING AID .
See The Rear Video Is Inoperative.
U0151:00 Lost Communication With Restraints Control Module: No Sub Type Information GO to PINPOINT TEST AD
U0155:00 Lost Communication With Instrument Panel Cluster IPC  Control Module: No Sub Type Information GO to PINPOINT TEST AE
U0162:00 Lost Communication With Navigation Display Module: No Sub Type Information GO to PINPOINT TEST Y
U016A:00 Lost Communication With Global Positioning System Module: No Sub Type Information GO to PINPOINT TEST AG
U0184:00 Lost Communication With Radio: No Sub Type Information GO to PINPOINT TEST AH
U0256:00 Lost Communication With Front Controls Interface Module "A": No Sub Type Information GO to PINPOINT TEST AJ
U0423:00 Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the IPC  .
REFER to: INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES .
U1A00:87 Private Communication Network: Missing Message GO to PINPOINT TEST C
U2017:45 Control Module Software #2: Program Memory Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U2017:45 is retrieved again, PERFORM the APIM  Hardware Test. Refer to APIM HARDWARE TESTING .
U2017:51 Control Module Software #2: Not Programmed
U2017:52 Control Module Software #2: Not Activated
U2017:54 Control Module Software #2: Missing Calibration
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • This DTC  sets due to incomplete or incorrect APIM  programming/provisioning. CHECK the vehicle service history for recent service actions related to the APIM  .
    • If there have been recent service actions with the APIM  , REPEAT/PERFORM the APIM  programming as directed by the diagnostic scan tool.

      REFER to: SYNC MODULE [APIM] PROGRAMMING in General Procedures .

      See APIM PROGRAMMING .

    • If there have been no recent service actions, the APIM  has failed to retain configuration data. PERFORM the APIM  Hardware Test. Refer to APIM HARDWARE TESTING .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information
  • This DTC  sets due to incomplete or incorrect APIM  programming/provisioning. CHECK the vehicle service history for recent service actions related to the APIM  .
    • If there have been recent service actions with the APIM  , REPEAT/PERFORM the APIM  programming as directed by the diagnostic scan tool.

      REFER to: SYNC MODULE [APIM] PROGRAMMING in General Procedures .

      See APIM PROGRAMMING .

    • If there have been no recent service actions, the APIM  has failed to retain configuration data. PERFORM the APIM  Hardware Test. Refer to APIM HARDWARE TESTING .
U3000:04 Control Module: System Internal Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:04 is retrieved again, PERFORM the APIM  Hardware Test. Refer to APIM HARDWARE TESTING .
U3000:41 Control Module: General Checksum Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:41 is retrieved again, PERFORM the APIM  Hardware Test. Refer to APIM HARDWARE TESTING .
U3000:42 Control Module: General Memory Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:42 is retrieved again, PERFORM the APIM  Hardware Test. Refer to APIM HARDWARE TESTING .
U3000:88 Control Module: Bus Off
NOTE: The module was unable to communicate on the network at a point in time. The fault is not currently present since the module had to communicate with the diagnostic scan tool to report this DTC  .
To avoid repeat network concerns: 
  • INSPECT for damaged or corroded wiring at the APIM  . Refer to MODULE COMMUNICATIONS NETWORK for schematic and connector information.
  • CLEAR the DTC  .
  • WAIT at least 10 seconds.
  • REPEAT the network test with the diagnostic scan tool.
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to PINPOINT TEST AM
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to PINPOINT TEST AN
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.