Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Ford Fiesta STFACTORY OEM SERVICE PROCEDURE
Cruise Control System DTCS: Pcm
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| P0504 | Brake Switch "A"/"B" Correlation | GO to PINPOINT TEST B |
| P0572 | Brake Switch "A" Circuit Low | GO to PINPOINT TEST B |
| P0573 | Brake Switch "A" Circuit High | GO to PINPOINT TEST B |
| P0833 | Clutch Pedal Switch "B" Circuit | GO to PINPOINT TEST E |
| P1703 | Brake Switch Out of Self-Test Range | GO to PINPOINT TEST B |
| All other DTCs | - | Refer to the DTC Charts in appropriate Electric Engine Controls . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.