Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2014 Ford Fiesta STFACTORY OEM SERVICE PROCEDURE

Module Configuration and Parameter Chart

The chart describes specific module configuration information:

Module Name	Programmable Module Installation (PMI) Available	Reprogram/Flash Capable	Requires Adaptive Learning or Calibration	Available Programmable Parameters
ABS module (Stability control and hill start assist)	Yes	Yes	IVD initialization	None
APIM	Yes	Yes	No	None
ACM	Yes	Yes	No	Audio presets
BCM	Yes	Yes	No	Automatic locking/unlocking by speed enable/disable Tire size
FCDIM	No	Yes	No	None
FCIM	No	Yes	No	None
GPSM	Yes	Yes	No	None
HVAC module	No	Yes	No	None
IPC	Yes	Yes	No	Automatic locking/unlocking by speed enable/disable Tire size
OCSM	No	Yes	Seat weight sensor re-zero	None
PSCM	No	Yes	No	None
PCM	Yes	Yes	No	None
RFA module	No	Yes	No	None
RCM	Yes	Yes	No	None
TCM	No	Yes	No	None

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready Tools Compare Repair Quote Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.