2014 Ford F-150 Limited, RWDFACTORY OEM SERVICE PROCEDURE

Front Control Interface Module (FCIM)

DTC INDEX

DTC Description Action
B00D5:01 Restraint System Passenger Disable Indicator: General Electrical Failure
B113C:11 Hazard switch illumination: Circuit Short To Ground
B1202:01 Restraint System Passenger Enable Indicator: General Electrical Failure
U0155:00 Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information GO to PINPOINT TEST AF .
U0257:00 Lost Communication With Front Controls/Display Interface Module: No Sub Type Information GO to PINPOINT TEST AL .
U0423:00 Invalid Data Received from Instrument Panel Cluster Control Module: No Sub Type Information RETRIEVE and FOLLOW DTCs present in the IPC  . REFER to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES .
U2013:63 Switch Pack: Circuit/Component Protection Time-Out
U3000:41 Control Module: General Checksum Failure
U3000:42 Control Module: General Memory Failure
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to PINPOINT TEST AM .
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to PINPOINT TEST AN .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.