SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2014F-150 FX2, 2D PICKUPREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 116 (MODULE CONFIGURATION SYSTEM - F150)DIAGNOSIS AND TESTINGMODULE CONFIGURATIONPRINCIPLES OF OPERATIONAS-BUILT DATA
2014 Ford F-150 FX2, 2D Pickup

As-Built Data

2014 Ford F-150 FX2, 2D PickupSECTION As-Built Data
WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

As-Built data is a VIN-specific module configuration record. During vehicle build, the configuration from all modules is downloaded and stored in the As-Built database. As-Built data does not reflect customer preference items that have been changed from the default state. These items need to be changed using programmable parameters after the module is configured.

NOTE: It is not necessary to obtain As-Built data unless directed to do so by the scan tool. This data may be accessed from the technician service publication web site.
MODULE CONFIGURATION AND PARAMETER CHART

Module Requires PMI Reprogram/Flash Capable Requires Adaptive Learning or Calibration Available Programmable Parameters
4X4 control module No No No None
ABS module Yes Yes
  • Stability control initialization
 None
Accessory Protocol Interface Module (APIM) Yes Yes No
  • Stereo in pass-through
Audio Front Control Module (ACM) Yes Yes No None
Audio Digital Signal Processing (DSP) module Yes Yes No None
Body Control Module (BCM) Yes Yes No
  • Axle ratio
  • Fog lamps
  • Front turn lamp outage configuration
  • Police dark car feature
  • Smart unlocking
  • Rear turn lamp outage configuration
  • Tire placard pressure
  • Tire size
  • Daytime running lamps
Driver Seat Module (DSM) Yes Yes No None
Dual Climate Controlled Seat Module (DCSM) Yes Yes No None
Front Controls Interface Module (FCIM) No Yes No None
Front Display Interface Module (FDIM) (without navigation) Yes Yes No None
Global Positioning System Module (GPSM) No Yes No None
HVAC module - DATC Yes Yes No None
HVAC module - EMTC Yes Yes No None
Interior Lighting Control Module (ILCM) Yes Yes No None
Instrument Panel Cluster (IPC) Yes Yes No
  • Trailer Brake Control (TBC) gain
  • Trailer sway
Occupant Classification System (OCS) module No Yes
  • Seat weight sensor re-zero
 None
Parking Aid Module (PAM) No Yes No None
Power Steering Control Module (PSCM) Yes Yes No None
PCM Yes Yes
  • Adaptive airflow
  • Idle speed
  • Refueling event
  • Fuel trim
  • Speed control
Power Running Board (PRB) module No Yes No None
Restraints Control Module (RCM) Yes Yes
  • Seat weight sensor re-zero
  • Stability control initialization
  • Driver seat Belt-Minder® activation
Steering Column Control Module (SCCM) Yes Yes No
  • Courtesy wipe
Trailer Brake Control (TBC) module No No No None
Tire Pressure Monitor (TPM) module No Yes No None
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.