2014 Ford Expedition XLT, 4WDFACTORY OEM SERVICE PROCEDURE

Module Configuration System DTCS

DTC INDEX

DTC Description Source Action
B2477 Module Configuration Failure
  • ABS module
  • Audio Front Control Module (ACM)
  • Audio Rear Control Unit (RCU)
  • Driver Seat Module (DSM)
  • Dual Climate Controlled Seat Module (DCSM)
  • Instrument Cluster (IC)
  • Restraints Control Module (RCM)
  • Satellite Digital Audio Receiver System (SDARS) module
  • Smart Junction Box (SJB)
CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
B2477 Module Configuration Failure
  • Accessory Protocol Interface Module (APIM)
CARRY OUT APIMĀ  programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING .
B2477 Module Configuration Failure
  • PAMĀ  - Navigator
INSTALL a new PAMĀ  . REFER to Parking Aid Module (PAM) .
B2477 Module Configuration Failure
  • Vehicle Dynamics Module (VDM)
INSTALL a new VDMĀ  . REFER to Vehicle Dynamics Module (VDM) .
B2900 Vehicle Identification Number (VIN) mismatch
  • ABS module
  • RCMĀ 
CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P0602 Powertrain Control Module Programming Error
  • PCM
CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P0605 Internal Control Module Read Only Memory (ROMĀ  ) Error
  • PCM
CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P1639 Vehicle ID Block Corrupted, Not Programmed
  • PCM
CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U0300 Internal Control Module Software Incompatibility
  • PCM
  • RCMĀ 
CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U201A:51 Control Module Main Calibration Data: Missing Calibration
  • ACMĀ 
  • Audio Digital Signal Processing (DSP) module
CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2050 No Application Present
  • ABS module
  • ACMĀ 
  • Audio RCUĀ 
  • DCSMĀ 
  • DSMĀ 
  • ICĀ 
  • PAMĀ 
  • PCM
  • RCMĀ 
  • SDARSĀ  module
  • SJBĀ 
CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2050 No Application Present
  • 4X4 control module
INSTALL a new 4X4 control module. REFER to 4X4 Control Module .
U2050 No Application Present
  • APIMĀ 
CARRY OUT APIMĀ  programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING .
U2050 No Application Present
  • HVAC module
INSTALL a new HVAC module. REFER to Heating Ventilation Air Conditioning (HVAC) Module .
U2050 No Application Present
  • Liftgate/Trunk Module (LTM)
INSTALL a new LTMĀ  . REFER to Liftgate/Trunk Module (LTM) .
U2050 No Application Present
  • Power Running Board (PRB) module
INSTALL a new PRBĀ  module. REFER to Power Running Board (PRB) Module .
U2050 No Application Present
  • VDMĀ 
INSTALL a new VDMĀ  . REFER to Vehicle Dynamics Module (VDM) .
U2051 One or More Calibration Files Missing/Corrupt
  • ACMĀ 
  • ICĀ 
  • PCM
  • RCMĀ 
CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2051 One or More Calibration Files Missing/Corrupt
  • LTMĀ 
INSTALL a new LTMĀ  . REFER to Liftgate/Trunk Module (LTM) .
U2051 One or More Calibration Files Missing/Corrupt
  • PAMĀ  - Navigator
INSTALL a new PAMĀ  . REFER to Parking Aid Module (PAM) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • ACMĀ 
  • Audio DSPĀ  module
CARRY OUT PMIĀ  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • APIMĀ 
CARRY OUT APIMĀ  programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING .
U2101:00 Initial Configuration Incompatible: No Sub Type Information
  • APIMĀ 
CARRY OUT APIMĀ  programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.