Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2013 Ford Transit Connect XLFACTORY OEM SERVICE PROCEDURE
Interior Lighting System DTCS
GENERIC ELECTRONIC MODULE (GEM) DTC CHART
| DTC | Description | Action |
|---|---|---|
| B1315 | Battery Saver Relay Coil Circuit Short To Battery | If the courtesy lamps are inoperative, GO to PINPOINT TEST B . If the battery saver does not deactivate after time-out, GO to PINPOINT TEST E . |
| B1316 | Battery Saver Relay Coil Circuit Short To Ground | GO to PINPOINT TEST B . |
| B1319 | Driver Door Ajar Circuit Failure | GO to PINPOINT TEST A . |
| B1327 | Passenger Door Ajar Circuit Failure | GO to PINPOINT TEST A . |
| B1335 | Door Ajar RR Circuit Failure | GO to PINPOINT TEST A . |
| B1571 | Door Ajar LR Circuit Failure | GO to PINPOINT TEST A . |
| B2555 | Dome Lamp Output Circuit Short to Battery | GO to PINPOINT TEST B . |
| All other DTCs | - | REFER to the DIAGNOSTIC TROUBLE CODE (DTC) CHART . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.