2013 Ford Taurus SHOFACTORY OEM SERVICE PROCEDURE

Powertrain Control Module (Pcm)

PCM DTC CHART

DTC Description Action
P0457 Evaporative Emission System Leak Detected (fuel cap loose/off) REFER to ENGINE CONTROLS - SYMPTOM CHARTS (EXCEPT DIESEL & HYBRID) (SECTION 3) .
P0460 Fuel Level Sensor A Circuit REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first. If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST B . for single sender L-shaped fuel tank or GO to PINPOINT TEST C . for dual sender saddle-type fuel tank.
P0461 Fuel Level Sensor A Circuit Range/Performance REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first. If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST B . for single sender L-shaped fuel tank or GO to PINPOINT TEST C . for dual sender saddle-type fuel tank.
P0462 Fuel Level Sensor A Circuit Low REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first. If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST B . for single sender L-shaped fuel tank or GO to PINPOINT TEST C . for dual sender saddle-type fuel tank.
P0463 Fuel Level Sensor A Circuit High REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first. If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST B . for single sender L-shaped fuel tank or GO to PINPOINT TEST C . for dual sender saddle-type fuel tank.
P1678 Low Oil Pressure Lamp Control Circuit GO to PINPOINT TEST AH .
P2065 Fuel Level Sensor B Circuit REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first. If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST C .
P2066 Fuel Level Sensor B Circuit Range/Performance REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first. If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST C .
P2067 Fuel Level Sensor B Circuit Low REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first. If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST C .
P2068 Fuel Level Sensor B Circuit High REFER to the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) first. If sent here from the ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) , GO to PINPOINT TEST C .
All Other DTCs - REFER to MULTIFUNCTION ELECTRONIC MODULES .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.