2013 Ford Taurus SHOFACTORY OEM SERVICE PROCEDURE

Charging System: Specifications

GENERAL SPECIFICATIONS

Item Specification
Generator (2.0L GTDI, without climate control seats) 
Rating 175 amps
Output 106/178 amps (max) @ 700-2, 000 engine RPM
Pulley ratio 2.44:1
Generator (2.0L GTDI, with climate control seats) 
Rating 200 amps
Output 117/207 amps (max) @ 700-2, 000 engine RPM
Pulley ratio 2.44:1
Generator (3.5L GTDI, early production) 
Rating 200 amps
Output 109/191 amps (max) @ 600-2, 000 engine RPM
Pulley ratio 2.66:1
Generator (3.5L GTDI, late production) 
Rating 175 amps
Output 88/175 amps (max) @ 600-2, 000 engine RPM
Pulley ratio 2.66:1
Generator (3.5L Ti-VCT) 
Rating 175 amps
Output 88/175 amps (max) @ 600-2, 000 engine RPM
Pulley ratio 2.66:1
Generator (Police) 
Rating 220 amps
Output 103/217 amps (max) @ 600-2, 000 engine RPM
Pulley ratio 2.67:1
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Compressor-to-condenser discharge line bracket nut 15 - 133
Generator B+ nut 17 - 150
Generator bolts (2.0L GTDI) 25 18 -
Generator clutch pulley 75 55 -
Generator nut/bolts (3.5L GTDI, 3.5L Ti-VCT) 47 35 -
Generator radial arm adaptor nut 9 - 80
Generator stud 8 - 71
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.