2013 Ford Fusion SFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil Gas 4.90 OZS. 0.14 L PAG 46 S
Air Cond Refrigerant 2.5L Eng 1.50 LBS. 0.68 KG R-134a S
Automatic Transmission Fluid Automatic Trans 9.00 QTS. 8.51 L MOTORCRAFT Automatic Transmission Fluid MERCON LV Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF. S
Brake Fluid N/A N/A MOTORCRAFT DOT 4 LV High Performance Brake Fluid, or equivalent. Meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage. S
Engine Coolant 2.5L Eng 9.20 QTS. 8.7 L MOTORCRAFT Orange Antifreeze/Coolant Prediluted Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary. S
Engine Oil 2.5L Eng 5.70 QTS. 5.39 L MOTORCRAFT SAE 5W-20 Premium Synthetic Blend, SAE 5W-20 Full Synthetic Motor Oil Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD specification WSS-M2C945-A and the API certification mark. S
Fuel Tank FWD 17.50 GALS. 66.24 L S
Manual Transmission Fluid Dry Fill 1.70 QTS. 1.6 L MOTORCRAFT Dual Clutch Transmission Fluid XT-11-QDC S
Transfer Case Fluid Power Transfer Unit 0.37 QTS. 0.35 L MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant S
Windshield Washer Fluid N/A N/A MOTORCRAFT Premium Windshield Washer Concentrate Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.