Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2013 Ford F-150 Limited, RWDFACTORY OEM SERVICE PROCEDURE
Steering Column Control Module (SCCM)
STEERING COLUMN CONTROL MODULE (SCCM) DTC CHART
| DTC | Description | Action |
|---|---|---|
| B1007:09 | High-Beam Headlamp Switch: Component Failure | INSTALL a new multifunction switch. REFER to STEERING COLUMN SWITCHES . TEST the system for normal operation. If the concern still exists, INSTALL a new SCCM. REFER to STEERING COLUMN SWITCHES . TEST the system for normal operation. |
| B10A6:09 | Main Light Switch: Component Failure | GO to PINPOINT TEST C . |
| B1D36:09 | Turn Indicator Switch: Component Failure | If the turn lamp function is inoperative, GO to PINPOINT TEST L . If the turn lamp function is always on, INSTALL a new multifunction switch. REFER to STEERING COLUMN SWITCHES . TEST the system for normal operation. If the concern still exists, INSTALL a new SCCM. REFER to STEERING COLUMN SWITCHES . TEST the system for normal operation. |
| All other DTCs | - | REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
