Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2013 Ford Explorer Police Interceptor, FWDFACTORY OEM SERVICE PROCEDURE
Wiper System And Washer System DTCS
DTC DESCRIPTION - SCCM
| DTC | Description | Action |
|---|---|---|
| B10AD:02 | Rain Sensor: General Signal Failure | GO to PINPOINT TEST G . |
| B10AD:08 | Rain Sensor: Bus Signal/Message Failure | If the windshield wipers only operate in high speed mode, GO to PINPOINT TEST F
. If the rain sensitive wiper function is inoperative, GO to PINPOINT TEST G . |
| B1131:02 | Wiper Motor Module: General Signal Failure | If the windshield wipers are inoperative, GO to PINPOINT TEST A
. If the windshield wipers only operate in high speed mode, GO to PINPOINT TEST F . |
| B1131:08 | Wiper Motor Module: Bus Signal/Message Failure | If the windshield wipers are inoperative, GO to PINPOINT TEST A
. If the windshield wipers only operate in high speed mode, GO to PINPOINT TEST F . |
| All other SCCMÂ DTCs | - | REFER to STEERING COLUMN SWITCHES . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
