Wiper System And Washer System DTCS

2013 Ford Explorer Police Interceptor, FWDSECTION Wiper System And Washer System DTCS
DTC DESCRIPTION - SCCM

DTC Description Action
B10AD:02 Rain Sensor: General Signal Failure GO to PINPOINT TEST G .
B10AD:08 Rain Sensor: Bus Signal/Message Failure If the windshield wipers only operate in high speed mode, GO to PINPOINT TEST F .
If the rain sensitive wiper function is inoperative, GO to PINPOINT TEST G .
B1131:02 Wiper Motor Module: General Signal Failure If the windshield wipers are inoperative, GO to PINPOINT TEST A .
If the windshield wipers only operate in high speed mode, GO to PINPOINT TEST F .
B1131:08 Wiper Motor Module: Bus Signal/Message Failure If the windshield wipers are inoperative, GO to PINPOINT TEST A .
If the windshield wipers only operate in high speed mode, GO to PINPOINT TEST F .
All other SCCM  DTCs - REFER to STEERING COLUMN SWITCHES .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.