Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2013EXPLORER POLICE INTERCEPTOR, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALCHARGING SYSTEMSCHARGING SYSTEMSPECIFICATIONSGENERAL SPECIFICATIONS
2013 Ford Explorer Police Interceptor, AWD
General Specifications
2013 Ford Explorer Police Interceptor, AWDSECTION General Specifications
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Generator - 2.0L GTDI | |
| Generator pulley ratio | 2.49:1 |
| Rating | 130 amps at 723 Revolutions Per Minute (RPM) (min) to 202 amps at 2, 410 Revolutions Per Minute (RPM) (max) |
| Generator - 3.5L GTDI | |
| Generator pulley ratio | 2.63:1 |
| Rating | 127 amps at 684 Revolutions Per Minute (RPM) (min) to 196 amps at 2, 281 Revolutions Per Minute (RPM) (max) |
| Generator - 3.5L Ti-VCT Base | |
| Generator pulley ratio | 2.63:1 |
| Rating | 104 amps at 684 Revolutions Per Minute (RPM) (min) to 175 amps at 2, 281 Revolutions Per Minute (RPM) (max) |
| Generator - 3.5L Ti-VCT Optional | |
| Generator pulley ratio | 2.63:1 |
| Rating | 127 amps at 684 Revolutions Per Minute (RPM) (min) to 196 amps at 2, 281 Revolutions Per Minute (RPM) (max) |
| Generator - 3.7L Ti-VCT | |
| Generator pulley ratio | 2.67:1 |
| Rating | 136 amps at 674 Revolutions Per Minute (RPM) (min) to 220 amps at 2, 248 Revolutions Per Minute (RPM) (max) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.