Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2013 Ford Escape Titanium, FWDFACTORY OEM SERVICE PROCEDURE
Trailer Module
| DTC | Description | Action |
|---|---|---|
| B1102:62 | Trailer Stop Lamp: Signal Compare Failure | GO to PINPOINT TEST X . |
| C111A:11 | Right Stop Lamp: Circuit Short To Ground | GO to PINPOINT TEST X . |
| C111A:12 | Right Stop Lamp: Circuit Short To Battery | GO to PINPOINT TEST X . |
| C111B:11 | Left Stop Lamp: Circuit Short To Ground | GO to PINPOINT TEST X . |
| C111B:12 | Left Stop Lamp: Circuit Short To Battery | GO to PINPOINT TEST X . |
| C1126:11 | Position Lamps: Circuit Short To Ground | GO to PINPOINT TEST Y . |
| C1126:12 | Position Lamps: Circuit Short To Battery | GO to PINPOINT TEST Y . |
| U0010:00 | Medium Speed CAN Communication Bus: No Sub Type Information | REFER to MODULE COMMUNICATIONS NETWORK , No Medium Speed Controller Area Network (MS-CAN) - All Modules Not Responding. |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST AB . |
| U0300:00 | Internal Control Module Software Incompatibility: No Sub Type Information | CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure as directed by the scan tool. REFER to Programmable Module Installation (PMI) in MODULE CONFIGURATION . If there have been no recent service actions, INSTALL a new trailer module to correct the failure to retain configuration data. REFER to TRAILER MODULE . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure as directed by the scan tool. REFER to Programmable Module Installation (PMI) in MODULE CONFIGURATION . If there have been no recent service actions, INSTALL a new trailer module to correct the failure to retain configuration data. REFER to TRAILER MODULE . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure as directed by the scan tool. REFER to Programmable Module Installation (PMI) in MODULE CONFIGURATION . If there have been no recent service actions, INSTALL a new trailer module to correct the failure to retain configuration data. REFER to TRAILER MODULE . |
| U3000:42 | Control Module: General Memory Failure | CLEAR the DTC. REPEAT the self-test. If the DTC returns, INSTALL a new trailer module to correct the failure to retain configuration data. REFER to TRAILER MODULE . |
| U3000:51 | Control Module: Not Programmed | CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure as directed by the scan tool. REFER to Programmable Module Installation (PMI) in MODULE CONFIGURATION . If there have been no recent service actions, INSTALL a new trailer module to correct the failure to retain configuration data. REFER to TRAILER MODULE . |
| U3003:62 | Battery Voltage: Signal Compare Failure | GO to PINPOINT TEST W . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.