Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2013 Ford Escape Titanium, FWDFACTORY OEM SERVICE PROCEDURE
HVAC Module
NOTE:
Some PCM DTCs may inhibit A/C operation. If any PCM DTCs are retrieved, diagnose those first. Refer to the PCM DTC Chart
.
HVAC MODULE DTC CHART
| DTC | Description | Action to Take |
|---|---|---|
| B105A:00 | Cabin Temperature Sensor Fan: No Sub Type Information | GO to PINPOINT TEST D . |
| B1081:00 | Left Temperature Damper Motor: No Sub Type Information | GO to PINPOINT TEST O . |
| B1082:00 | Right Temperature Damper Motor: No Sub Type Information | GO to PINPOINT TEST G . |
| B1083:00 | Recirculation Damper Motor: No Sub Type Information | GO to PINPOINT TEST I . |
| B1085:00 | Defroster Damper Motor: No Sub Type Information | GO to PINPOINT TEST J . |
| B1086:00 | Air Distribution Damper Motor: No Sub Type Information | GO to PINPOINT TEST J . |
| B10B3:00 | Right Panel Air Discharge Temperature: No Sub Type Information | GO to PINPOINT TEST V . |
| B10B4:00 | Right Floor Air Discharge Temperature: No Sub Type Information | GO to PINPOINT TEST V . |
| B10B5:00 | Left Panel Air Discharge Temperature: No Sub Type Information | GO to PINPOINT TEST V . |
| B10B6:00 | Left Floor Air Discharge Temperature: No Sub Type Information | GO to PINPOINT TEST V . |
| B10B8:00 | Push Buttons: No Sub Type Information | INSTALL a new HVAC module. REFER to HEATING VENTILATION AIR CONDITIONING (HVAC) MODULE . |
| B10B9:00 | Blower Control: No Sub Type Information | GO to PINPOINT TEST Q . |
| B1A61:00 | Cabin Temperature Sensor: No Sub Type Information | GO to PINPOINT TEST D . |
| B1A63:00 | Right Solar Sensor: No Sub Type Information | GO to PINPOINT TEST U . |
| B1A64:00 | Left Solar Sensor: No Sub Type Information | GO to PINPOINT TEST U . |
| B1A69:00 | Humidity Sensor: No Sub Type Information | GO to PINPOINT TEST E . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST R . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to PINPOINT TEST S . |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | RETRIEVE and REPAIR all non-network DTCs in the BCM. REFER to MULTIFUNCTION ELECTRONIC MODULES DTC Chart. |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CARRY OUT Programmable Module Installation (PMI) on the HVAC module. REFER to MODULE CONFIGURATION . REPEAT the self-test. If PMI is successful, the DTC will not be present. If the DTC returns, INSTALL a new HVAC module. REFER to HEATING VENTILATION AIR CONDITIONING (HVAC) MODULE . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | CARRY OUT Programmable Module Installation (PMI) on the HVAC module. REFER to MODULE CONFIGURATION . REPEAT the self-test. If PMI is successful, the DTC will not be present. If the DTC returns, INSTALL a new HVAC module. REFER to HEATING VENTILATION AIR CONDITIONING (HVAC) MODULE . |
| U3000:00 | Control Module: No Sub Type Information | INSTALL a new HVAC module. REFER to HEATING VENTILATION AIR CONDITIONING (HVAC) MODULE . |
| U3006:16 | Control Module Input Power "A": Circuit Voltage Below Threshold | GO to PINPOINT TEST T . |
| U3006:17 | Control Module Input Power "A": Circuit Voltage Above Threshold | GO to PINPOINT TEST T . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.