Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2013 Ford Edge Sport, FWDFACTORY OEM SERVICE PROCEDURE
Global Positioning System Module (GPSM)
GLOBAL POSITIONING SYSTEM MODULE (GPSM) DTC CHART
| DTC | Description | Action |
|---|---|---|
| U0140: 00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test T . |
| U0155: 00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test V . |
| U0422: 00 | Invalid Data Received from Body Control Module: No Sub Type Information | RETRIEVE and FOLLOW diagnostics for other DTCs present in the Body Control Module (BCM). |
| U0423: 00 | Invalid Data Received from the Control Module: No Sub Type Information | RETRIEVE and FOLLOW diagnostics for other DTCs present in the Instrument Panel Cluster (IPC). |
| U2100: 00 | Initial Configuration Not Complete: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U2101: 00 | Control Module Configuration Incompatible: No Sub Type Information | REFER to MODULE CONFIGURATION . |
| U3000: 09 | Control Module: Component Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 09 is still present, INSTALL a new GPSM. REFER to Global Positioning System Module (GPSM) . REPEAT the self-test. |
| U3000: 41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 41 is still present, INSTALL a new GPSM. REFER to Global Positioning System Module (GPSM) . REPEAT the self-test. |
| U3000: 42 | Control Module: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000: 42 is still present, INSTALL a new GPSM. REFER to Global Positioning System Module (GPSM) . REPEAT the self-test. |
| U3003: 16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AD . |
| U3003: 17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AE . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.