Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSFORD2013E 150 V8-4.6LPARTS AND LABORMAINTENANCELABOR TIMES

2013 Ford E 150 V8-4.6L

Maintenance: Labor Times

2013 Ford E 150 V8-4.6LSECTION Labor Times

	Standard Hours	Manufacturer Warranty Hours	Skill Level	Notes
Service or Charge
Normal Service
7,500 Miles	1.3	0.0	C
15,000 Miles	1.5	0.0	C
22,500, Miles	1.3	0.0	C
30,000 Miles	1.5	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C
37,500 Miles	1.3	0.0	C
45,000 Miles	1.5	0.0	C
52,500 Miles	1.3	0.0	C
60,000 Miles	1.5	0.0	C
Note:
To Change Engine Air Filter, Add	0.3	0.0	C
To Change Automatic Transmission Fluid, Add	0.9	0.0	B	Torqshift transmissions only, includes drain, refill and replace filter element.
To Change Wheel Bearing Grease and seals, Add	1.6	0.0	B	(If non-sealed bearings)
67,500 Miles	1.3	0.0	C
75,000 Miles	1.5	0.0	C
82,500 Miles	1.3	0.0	C
90,000 Miles	1.5	0.0	C
Note:
To Change Engine Air Filter, Add	0.3	0.0	C
97,500 Miles	1.3	0.0	C
Note:
To Change Spark Plugs, Add	1.8	0.0	B
105,000 Miles	1.5	0.0	C
Note:
To Change Rear Axle Fluid, Add	0.5	0.0	C	(Dana axles)
To Change Engine Coolant, Add	0.7	0.0	C
112,500 Miles	1.3	0.0	C
120,000 Miles	1.5	0.0	C
Note:
To Change Engine Air Filter, Add	0.3	0.0	C
To Change Wheel Bearing Grease and seals, Add	1.6	0.0	B	(If non-sealed bearings)
To Change Automatic Transmission Fluid, Add	0.9	0.0	B	Torqshift transmissions only, includes drain, refill and replace filter element.
127,500 Miles	1.3	0.0	C
135,000 Miles	1.5	0.0	C
142,500 Miles	1.3	0.0	C
150,000 Miles	1.5	0.0	C
Note:
To Change Engine Air Filter, Add	0.3	0.0	C
To Change Drive Belts, Add	0.6	0.0	C
To Change Engine Coolant, Add	0.7	0.0	C
To Change Wheel Bearing and Seals, Add	1.6	0.0	C	(If non-sealed bearings)
To Change Automatic Transmission Fluid, Add	0.9	0.0	B	(except TorqShift)
To Change Rear Axle Fluid, Add	0.5	0.0	C
Severe Service
5,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
10,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
15,000 Miles	1.5	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C
20,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
25,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
30,000 Miles	1.5	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C
To Change Automatic Transmission Fluid, Add	0.9	0.0	B	If using special conditions T, I, D.
To Change Wheel Bearing Grease and seals, Add	1.6	0.0	B	(If non-sealed bearings). If using special conditions T, I, D.
35,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
40,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
45,000 Miles	1.5	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C
50,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
To Change Real Axle Fluid, Add	0.5	0.0	C	If using special condition D.
55,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
60,000 Miles	1.5	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C
To Change Spark Plugs, Add	1.8	0.0	B	If using special condition I.
To Change Automatic Transmission Fluid, Add	0.9	0.0	B
To Change Wheel Bearing Grease and seals, Add	1.6	0.0	B	(If non-sealed bearings)
65,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
70,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
75,000 Miles	1.5	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C
80,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
85,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
90,000 Miles	1.5	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C
To Change Automatic Transmission Fluid, Add	0.9	0.0	B	If using special conditions T, I, D.
To Change Wheel Bearing Grease and seals, Add	1.6	0.0	B	(If non-sealed bearings). If using special conditions T, I, D.
95,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
97,500 Miles
Note
To Change Spark Plugs, Add	1.8	0.0	B
100,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
To Change Rear Axle Fluid, Add	0.5	0.0	C	If using special condition D.
105,000 Miles	1.5	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C
To Change Engine Coolant, Add	0.7	0.0	C
To Change Rear Axle Fluid, Add	0.5	0.0	C	(Dana axles)
110,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
115,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
120,000 Miles	1.5	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C
To Change Automatic Transmission Fluid, Add	0.9	0.0	B
To Change Spark Plugs, Add	1.8	0.0	B	If using special condition I.
To Change Wheel Bearing Grease and seals, Add	1.6	0.0	B	(If non-sealed bearings)
125,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
130,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
135,000 Miles	1.5	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C
140,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
145,000 Miles	1.3	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C	If using speical condition D.
150,000 Miles	1.5	0.0	C
Note
To Change Engine Air Filter, Add	0.3	0.0	C
To Change Engine Coolant, Add	0.7	0.0	C
To Change Automatic Transmission Fluid, Add	0.9	0.0	B
To Change Rear Axle Fluid, Add	0.5	0.0	C
To Change Drive Belts, Add	0.6	0.0	C
To Change Wheel Bearing Grease and seals, Add	1.6	0.0	B	(If non-sealed bearings)

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.