Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2013C MAX ENERGI L4-2.0L HYBRIDREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSBODY CONTROL MODULETECHNICAL SERVICE BULLETINSCUSTOMER INTERESTSTARTING, BODY CONTROLS - STARTING ISSUES, MULTIPLE DTC'S SET
2013 Ford C Max Energi L4-2.0L Hybrid
Starting, Body Controls - Starting Issues, Multiple DTC's Set
2013 Ford C Max Energi L4-2.0L HybridSECTION Starting, Body Controls - Starting Issues, Multiple DTC's Set
TSB 13-2-5
02/14/13
1.6L GTDI/2.0L GTDI/2.0L GDI - DTCS
P025A/U0109/P0103/P1A0C
FORD:
2013 C-MAX, Focus, Escape
ISSUE
Some 2013 Escape 1.6L Gasoline Turbocharged Direct Injection (GTDI)/2.0L GTDI, 2013 Focus 2.0L Gasoline Direct Injection (GDI) and C-MAX vehicles equipped with Intelligent Access Remote Start feature may exhibit Diagnostic Trouble Codes (DTCs) P025A/UO1 09 (Escape), P025A/U0109/P0103 (Focus) and P025A/P0103/P1A0C (C-MAX) stored in the Powertrain Control Module memory. When using the Remote Start feature, customers may experience a Crank No-Start or Stall shortly after vehicle is driven. All DTC's (P025A/U0109 for Escape, P025A/U0109/PO1 03 for Focus and P025A/P0103/P1A0C for C-MAX) must be present for this TSB to apply.
ACTION
Reprogram the body control module (BCM) to the latest calibration using IDS release 83.02 or higher. Calibration files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
OPERATION DESCRIPTION TIME
130205A 2013 Escape 0.2 Hr.
1.6L/2.0L/2013 Focus 2.0L
GDI And C-MAX: Check
DTCs And Reprogram The
BCM Includes Time To
Clear Codes (Do Not Use
With Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
14A068 04
Disclaimer
02/14/13
1.6L GTDI/2.0L GTDI/2.0L GDI - DTCS
P025A/U0109/P0103/P1A0C
FORD:
2013 C-MAX, Focus, Escape
ISSUE
Some 2013 Escape 1.6L Gasoline Turbocharged Direct Injection (GTDI)/2.0L GTDI, 2013 Focus 2.0L Gasoline Direct Injection (GDI) and C-MAX vehicles equipped with Intelligent Access Remote Start feature may exhibit Diagnostic Trouble Codes (DTCs) P025A/UO1 09 (Escape), P025A/U0109/P0103 (Focus) and P025A/P0103/P1A0C (C-MAX) stored in the Powertrain Control Module memory. When using the Remote Start feature, customers may experience a Crank No-Start or Stall shortly after vehicle is driven. All DTC's (P025A/U0109 for Escape, P025A/U0109/PO1 03 for Focus and P025A/P0103/P1A0C for C-MAX) must be present for this TSB to apply.
ACTION
Reprogram the body control module (BCM) to the latest calibration using IDS release 83.02 or higher. Calibration files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
OPERATION DESCRIPTION TIME
130205A 2013 Escape 0.2 Hr.
1.6L/2.0L/2013 Focus 2.0L
GDI And C-MAX: Check
DTCs And Reprogram The
BCM Includes Time To
Clear Codes (Do Not Use
With Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
14A068 04
Disclaimer
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.