Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Ford Taurus SEFACTORY OEM SERVICE PROCEDURE
Network Message Chart
WARNING: This page is about a different car, the 2016 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
Module Network Input Messages RFA
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Remote start command | TPM module via LIN | Provides the RFA with the IA key command for a remote start. |
Network Input Messages BCM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| RKE data (with IA) | RFA module | Provides the BCM with the correct IA key data. Provides a request to the BCM for starting per customer remote start request. |
Network Input Messages PCM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Starter crank request | BCM | Provides the PCM with ignition, hood input status and a request to crank and start the engine during a remote start event. |
| Remote start request | BCM | Provides the PCM with a request for remote start. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.