2012 Ford Taurus SEFACTORY OEM SERVICE PROCEDURE

Symptom Chart

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Symptom Chart

Condition Possible Sources Action
  • The PCM does not respond to the scan tool
  • Wiring, terminals or connectors
  • PCM
  • The ABS module does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • ABS module
  • The restraints control module (RCM) does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • Case ground open
  • RCM
  • The four wheel drive (4WD) control module does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • 4WD control module
  • The occupant classification sensor module does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • Occupant classification sensor module
  • The adaptive front lighting module does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • Adaptive front lighting module
  • The steering angle sensor module does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • Steering angle sensor module
  • The instrument cluster does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • Instrument cluster
  • The smart junction box (SJB) does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • SJB
  • The electronic automatic temperature control (EATC) module does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • EATC module
  • The audio unit does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • Audio unit
  • The THX® amplifier does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • THX® amplifier
  • The satellite radio receiver does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • Satellite radio receiver
  • The digital versatile disc (DVD) player does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • DVD player
  • The driver seat module (DSM) does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • DSM
  • The climate controlled seat module does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • Climate controlled seat module
  • The parking aid module does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • Parking aid module
  • The power liftgate module does not respond to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • Power liftgate module
  • No medium speed controller area network (MS-CAN) communication, all modules are not responding
  • Wiring, terminals or connectors
  • Audio unit
  • SJB
  • Instrument cluster
  • THX® amplifier (if equipped)
  • Satellite radio receiver (if equipped)
  • Climate controlled seat module (if equipped)
  • DVD player (if equipped)
  • DSM (if equipped)
  • EATC module (if equipped)
  • Parking aid module (if equipped)
  • Power liftgate module (if equipped)
  • No high speed controller area network (HS-CAN) communication, all modules are not responding
  • Wiring, terminals or connectors
  • PCM
  • ABS module
  • RCM
  • Instrument cluster
  • Occupant classification sensor module
  • 4WD control module (if equipped)
  • Adaptive headlamp module (if equipped)
  • Steering angle sensor module (if equipped)
  • No power to the scan tool
  • Fuse
  • Wiring, terminals or connectors
  • Scan tool
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.