2012 Ford Taurus SEFACTORY OEM SERVICE PROCEDURE

Clutch Controls - Exploded View

WARNING: This page is about a different car, the 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Clutch Controls With Torque Specifications
GF0025310Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Clutch master cylinder hose (part of 7A543)
2 W520413-S437 Clutch master cylinder nuts (2 required)
3 - Clutch master cylinder push rod (part of 7A543)
4 - Clutch hydraulic fluid tube fitting (part of 7K592)
5 7A543 Clutch master cylinder
6 7K592 Clutch hydraulic fluid tube
7 - Clutch hydraulic fluid tube fitting (part of 7K592)
8 W500013-S439 Clutch hydraulic fluid tube bracket bolt
9 13B408 Clutch hydraulic fluid tube bracket
10 7K590 Clutch slave cylinder-to-clutch hydraulic fluid tube adapter
11 W706360-S439 Clutch slave cylinder bolts (3 required)
12 7A508 Clutch slave cylinder
  1. For further information, refer to the following procedures.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.