Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Ford Fiesta SES, Standard TransFACTORY OEM SERVICE PROCEDURE
Steering Column: Specifications
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Instant Gel Adhesive TA-19 |
WSK-M2G402-A4 | - |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Ignition switch/lock cylinder housing shear bolt | 15 | - | 133 |
| Knee air bag brace nuts | 8 | - | 71 |
| Steering column nuts | 24 | 18 | - |
| Steering column shaft-to-steering column bolt | 33 | 24 | - |
| Steering column shaft-to-steering gear bolt | 32 | 24 | - |
| Steering column shroud screws | 1 | - | 9 |
| Steering column switch carrier bolt | 7 | - | 62 |
| Steering wheel bolt | 40 | 30 | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.