2012 Ford Escape XLS, FWDFACTORY OEM SERVICE PROCEDURE

Fuel System - General Information: Specifications

MATERIAL SPECIFICATIONS

Item Specification Fill Capacity
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil
XO-5W20-QSP (US); Motorcraft® SAE 5W-20
Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent
WSS-M2C930-A -
GENERAL SPECIFICATIONS

Item Specification
Fuel Pressure 
Key ON Engine OFF (KOEO) 379 kPa (55 psi)
Fuel Tank Capacity 
Escape, Mariner 66.2L (17.5 gal)
Hybrid 56.5L (15 gal)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.