2012 Ford Escape Hybrid Limited, FWDFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil Gas/Electric 4.40 OZS. 0.13 L YN-32 S
Air Cond Refrigerant Hybrid,Hybrid Limited 2.00 LBS. 0.9 KG R-134a S
Brake Fluid N/A N/A MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid Fill to line on reservoir. S
Clutch Fluid N/A N/A MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid Fill to line on reservoir. S
Engine Coolant 2.5L Eng 7.40 QTS. 7 L MOTORCRAFT Specialty Orange Engine Coolant Add the coolant type originally equipped in the vehicle. S
Engine Oil 2.5L Eng w/Filter 5.30 QTS. 5.01 L MOTORCRAFT SAE 5W-20 Premium Synthetic Blend or Full Synthetic Motor Oil, or equivalent meeting Ford specification WSS-M2C945-A Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification: WSS-M2C930-A and the API Certification mark. S
Fuel Tank Gas/Electric 15.00 GALS. 56.78 L S
Windshield Washer Fluid N/A N/A MOTORCRAFT Premium Windshield Washer Concentrate Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.