Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Ford Transit Connect Van CargoFACTORY OEM SERVICE PROCEDURE
Cruise Control System DTCS: Pcm
PCM DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| P0579:00 | Cruise Control Multifunction Input A Circuit Range/Performance: No Sub Type Information | Go to PINPOINT TEST C . |
| P0581:00 | Cruise Control Multifunction Circuit High: No Sub Type Information | Go to PINPOINT TEST C . |
| P1572:00 | Brake Pedal Switch Circuit: No Sub Type Information | Go to PINPOINT TEST B . |
| P1703:00 | Brake Switch Out of Self-Test Range: No Sub Type Information | Go to PINPOINT TEST B . |
| All other DTCs | - | REFER to the INTRODUCTION article. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.