Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Ford Taurus SEFACTORY OEM SERVICE PROCEDURE
Starting System DTCS
PCM DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| P0512 | Starter Request Circuit - Circuit has Power With the Ignition in the OFF Position | Vehicles with key start, CARRY OUT the Ignition Switch Component Test. Refer to COMPONENT TESTING Article for component testing. If necessary, INSTALL a new ignition switch. If the ignition switch passed the component test, REPAIR circuit CDC35 (BU/WH) for a short to power. Vehicles with push button starting system, GO to PINPOINT TEST C . |
| P1260 | Theft Detected, Vehicle Immobilized | REFER to the DTC Chart in ANTI-THEFT SYSTEM - PASSIVE ANTI-THEFT SYSTEM (PATS) Article. |
| All other DTCs | - | REFER to the Master DTC Chart in MULTIFUNCTION ELECTRONIC MODULE Article. |
REMOTE FUNCTION ACTUATOR (RFA) MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST (VEHICLES WITH A PUSH-BUTTON START SYSTEM)
| DTC | Description | Action |
|---|---|---|
| P0615:11 | Start Relay Circuit: Short to Ground | GO to PINPOINT TEST E . |
| P0615:12 | Start Relay Circuit: Short to Battery | GO to PINPOINT TEST E . |
| P0615:13 | Start Relay Circuit: Circuit Open | GO to PINPOINT TEST E . |
| All other DTCs | - | REFER to the DTC Chart in MULTIFUNCTION ELECTRONIC MODULE Article. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.