2011 Ford Taurus SEFACTORY OEM SERVICE PROCEDURE

As-Built Data

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

As-Built data is a VIN specific module configuration record. During vehicle build, the configuration from all modules is downloaded and stored in the As-Built database. As Built data will not reflect customer preference items that have been changed from the default state. These items will need to be changed using programmable parameters after the module is configured.

NOTE: It is not necessary to obtain As-Built data unless directed to do so by the scan tool. This data may be accessed from the technician service publication website.

The following chart lists module As-Built data addresses:

MODULE ADDRESSES FOR AS-BUILT DATA ENTRY

Module Name Module Address
Anti-lock brake system (ABS) module 760
Instrument cluster 720
Restraints control module (RCM) 737
Smart junction box (SJB) 726
MODULE CONFIGURATION AND PARAMETER INDEX

Module Name Reprogram/ Flash Capable Requires PMI Requires Adaptive Learning Requires Calibration Available Programmable Parameters
Anti-lock brake system module No Yes No No
  • None
Four wheel drive (4WD) control module No No No No
  • None
Instrument cluster Yes Yes No No
  • Belt-Minder®
Occupant classification sensor module No No No
  • Seat weight sensor re-zero
  • None
Powertrain control module (PCM) Yes Yes Yes No
  • Axle ratio
  • Tire/wheel size
  • 4WD low range input
Restraints control module (RCM) Yes Yes No
  • Seat weight sensor re-zero
  • Driver seat Belt-Minder®
  • Passenger seat Belt-Minder®
Smart junction box (SJB) Yes Yes No No
  • Window one-touch-down
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.