Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Ford Taurus SEFACTORY OEM SERVICE PROCEDURE
Fuel System - General Information: Specifications
MATERIAL
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent |
WSS-M2C930-A | - |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Fuel tank capacity (L-shaped fuel tank) | 71.92L (19 gal) |
| Fuel tank capacity (saddle-type fuel tank) | 71.92L (19 gal) |
| Fuel Pressure | |
| Constant pressure (Key ON Engine OFF (KOEO) and Key ON Engine Running (KOER)) | 448 kPa (65 psi) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| High pressure fuel tube-to-fuel injection pump flare nut | 30 | 22 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.