Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Ford Fusion S, AutomaticFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | Gas | 6.00 OZS. | 0.17 L | YN-12-D | S | ||
| Air Cond Refrigerant | 1.38 LBS. | 0.62 KG | R-134a | S | |||
| Automatic Transmission Fluid | Trans Mfr CD 6F35,Trans Mfr Ford | 9.00 QTS. | 8.51 L | MOTORCRAFT Automatic Transmission Fluid MERCON LV | S | ||
| Brake Fluid | N/A | N/A | MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid | S | |||
| Engine Coolant | S,SE,SEL,2.5L Eng | 8.60 QTS. | 8.13 L | MOTORCRAFT Specialty Green Engine Coolant | S | ||
| Engine Oil | S,SE,SEL,2.5L Eng | w/Filter | 5.30 QTS. | 5.01 L | SAE 5W-20 Premium Synthetic Blend Motor Oil | Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification: WSS-M2C930-A and the API Certification mark. | S |
| Fuel Tank | FWD | 17.50 GALS. | 66.24 L | S | |||
| Manual Transmission Fluid | 3.00 QTS. | 2.83 L | API GL-4, SAE 75W-90 Gear Oil | Service refill capacity is determined by filling the transmission within 3/8 inch (10mm) of the bottom of the filler hole with the vehicle on a level surface. | S | ||
| Transfer Case Fluid | Power Transfer Unit | 0.35 QTS. | 0.33 L | SAE 75W-140 High Performance Synthetic Rear Axle Gear Oil | The Power Transfer Unit is lubricated for life with synthetic lube. Lubricant levels are not to be checked or changed unless a leak is suspected or repair required. Replace Power Transfer Unit lubricant with specified synthetic lubricant anytime the unit is submerged in water. | S | |
| Windshield Washer Fluid | N/A | N/A | MOTORCRAFT Premium Windshield Washer Concentrate Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.