2011 Ford Fusion S, AutomaticFACTORY OEM SERVICE PROCEDURE

Cruise Control DTCS

PCM DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTCs Description Action
P0572 Brake Switch A Circuit Low GO to PINPOINT TEST B .
P0573 Brake Switch A Circuit High GO to PINPOINT TEST B .
P0579 Cruise Control Multifunction Input A Circuit Range/Performance GO to PINPOINT TEST C .
P0581 Cruise Control Multifunction Circuit High GO to PINPOINT TEST C .
P1703 Brake Switch Out of Self-Test Range GO to PINPOINT TEST B .
All other DTCs - REFER to the INTRODUCTION - GASOLINE MODELS article or INTRODUCTION -- FUSION HYBRID, MILAN HYBRID & MKZ HYBRID article to continue diagnosis.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.