Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Ford Focus SES, AutomaticFACTORY OEM SERVICE PROCEDURE
Electronic Engine Controls DTCS
PCM DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action to Take |
|---|---|---|
| P0125 | Insufficient Coolant Temp For Closed Loop Fuel Control | REFER to DTC CHART . |
| P0128 | Coolant Thermostat (Coolant Temp Below Thermostat Regulating Temperature) | REFER to DTC CHART . |
| P0217 | Engine Coolant Overtemperature Condition | REFER to DTC CHART . |
| P0512 | Starter Request Circuit | REFER to DTC TABLE . |
| P0532 | A/C Refrigerant Pressure Sensor A Circuit Low | REFER to HVAC -DTC CHARTS . |
| P0533 | A/C Refrigerant Pressure Sensor A Circuit High | REFER to HVAC -DTC CHARTS . |
| P0563 | System Voltage High | REFER to SYMPTOM CHART . |
| P0579 | Cruise Control Multi-Function Input A Circuit Range/Performance | REFER to DTC TABLES . |
| P0581 | Cruise Control Multi-Function Input A Circuit High | REFER to DTC TABLES . |
| P0602 | Powertrain Control Module Programming Error | REFER to DTC CHARTS . |
| P0605 | Internal Control Module Read Only Memory (ROM) Error | REFER to DTC CHARTS . |
| P0620 | Generator Control Circuit | REFER to SYMPTOM CHART . |
| P0625 | Generator Field Terminal Circuit Low | REFER to SYMPTOM CHART . |
| P0626 | Generator Field Terminal Circuit High | REFER to SYMPTOM CHART . |
| P0645 | A/C Clutch Relay Control Circuit | REFER to HVAC -DTC CHARTS . |
| P065B | Generator Control Circuit Range/Performance | REFER to SYMPTOM CHART . |
| P0705 | Transmission Range Sensor A Circuit (PRNDL Input) | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0706 | Transmission Range Sensor A Circuit Range/Performance | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0707 | Transmission Range Sensor A Circuit Low | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0709 | Transmission Range Sensor A Circuit Intermittent | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0712 | Transmission Fluid Temperature Sensor A Circuit Low | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0713 | Transmission Fluid Temperature Sensor A Circuit High | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0715 | Turbine/Input Shaft Speed Sensor A Circuit | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0717 | Turbine/Input Shaft Speed Sensor A Circuit No Signal | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0718 | Turbine/Input Shaft Speed Sensor A Circuit Intermittent | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0720 | Output Shaft Speed Sensor Circuit | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0721 | Output Shaft Speed Sensor Circuit Range/Performance | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0722 | Output Shaft Speed Sensor Circuit No Signal | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0731 | Gear 1 Incorrect Ratio | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0732 | Gear 2 Incorrect Ratio | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0733 | Gear 3 Incorrect Ratio | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0734 | Gear 4 Incorrect Ratio | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0741 | Torque Converter Clutch Solenoid Circuit Performance/Stuck Off | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0750 | Shift Solenoid A | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0751 | Shift Solenoid A Performance/Stuck Off | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0752 | Shift Solenoid A Stuck On | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0753 | Shift Solenoid A Electrical | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0755 | Shift Solenoid B | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0756 | Shift Solenoid B Performance/Stuck Off | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0757 | Shift Solenoid B Stuck On | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0758 | Shift Solenoid B Electrical | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0760 | Shift Solenoid C | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0761 | Shift Solenoid C Performance/Stuck Off | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0762 | Shift Solenoid C Stuck On | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0763 | Shift Solenoid C Electrical | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0765 | Shift Solenoid D | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0766 | Shift Solenoid D Performance/Stuck Off | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0767 | Shift Solenoid D Stuck On | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0768 | Shift Solenoid D Electrical | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0770 | Shift Solenoid E | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0771 | Shift Solenoid E Performance/Stuck Off | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0772 | Shift Solenoid E Stuck On | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0773 | Shift Solenoid E Electrical | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0960 | Pressure Control Solenoid A Control Circuit/Open | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0962 | Pressure Control Solenoid A Control Circuit Low | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0963 | Pressure Control Solenoid A Control Circuit High | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0972 | Shift Solenoid A Control Circuit Range/Performance | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0975 | Shift Solenoid B Control Circuit Range/Performance | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0978 | Shift Solenoid C Control Circuit Range/Performance | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0981 | Shift Solenoid D Control Circuit Range/Performance | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P0984 | Shift Solenoid E Control Circuit Range/Performance | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P1260 | Theft Detected, Vehicle Immobilized | REFER to ANTI-THEFT SYSTEM - DTC CHARTS . |
| P1285 | Cylinder Head Overtemperature Condition | REFER to DTC CHART . |
| P1299 | Cylinder Head Overtemperature Protection Active | REFER to DTC CHART . |
| P1464 | A/C Demand Out Of Self Test Range | REFER to HVAC -DTC CHARTS . |
| P1572 | Brake Pedal Switch Circuit | REFER to DTC TABLES . |
| P1602 | Immobilizer/ECM Communication Error a | REFER to ANTI-THEFT SYSTEM - DTC CHARTS . |
| P1622 | Immobilizer ID Does Not Match | REFER to ANTI-THEFT SYSTEM - DTC CHARTS . |
| P1639 | Vehicle ID Block Corrupted, Not Programmed | REFER to INSPECTION AND VERIFICATION . |
| P1700 | Transmission Indeterminate Failure (Failed to Neutral) | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P1702 | Transmission Range Sensor Circuit Intermittent | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P1703 | Brake Switch Out Of Self Test Range | REFER to DTC TABLES . |
| P1705 | Transmission Range Circuit Not Indicating Park/Neutral During Self Test | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P1710 | Transmission Control Module Solenoid/Internal Ground Circuit | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P1711 | Transmission Fluid Temperature Sensor Out Of Self Test Range | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P1713 | Transmission Fluid Temperature Sensor In Range Failure (< 50 deg F) | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P1718 | Transmission Fluid Temperature Sensor In Range Failure 250 deg F) | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P1744 | Torque Converter Clutch Solenoid Circuit Performance | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P1780 | Transmission Control Switch (O/D Cancel) Circuit Out Of Self Test Range | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| P1783 | Transmission Overtemperature Condition | REFER to AUTOMATIC TRANSMISSION - DIAGNOSTIC TROUBLE CODE (DTC) CHARTS . |
| U0300 | Internal Control Module Software Incompatibility | REFER to INSPECTION AND VERIFICATION . |
| U2050 | No Application Present | REFER to INSPECTION AND VERIFICATION . |
| U2051 | One or More Calibration Files Missing/Corrupt | REFER to INSPECTION AND VERIFICATION . |
| All Other DTCs | - | REFER to ENGINE CONTROLS - INTRODUCTION - GASOLINE MODELS . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.