Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Ford Focus SES, AutomaticFACTORY OEM SERVICE PROCEDURE
Electronic Engine Controls: Specifications
MATERIAL
| Item | Specification | Fill Capacity |
|---|---|---|
| High Temperature Nickel Anti-Seize Lubricant XL-2 | ESE-M12A4-A | - |
| Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent | WSS-M2C930-A | - |
| Penetrating and Lock Lubricant (US); Penetrating Fluid (Canada) XL-1 (US); CXC-51-A (Canada) | - | - |
TORQUE SPECIFICATIONS
| Description | Nm | lb-in | ||
|---|---|---|---|---|
| Accessory drive belt splash shield bolts | 9 | 80 | ||
| Camshaft Position (CMP) sensor | 7 | 62 | ||
| Catalyst Monitor Sensor (CMS) (1) | - | - | ||
| Crankshaft Position (CKP) sensor(1) | - | - | ||
| Cylinder block plug | 20 | 177 | ||
| Cylinder Head Temperature (CHT) sensor | 12 | 106 | ||
| Heated Oxygen Sensor (HO2S) (1) | - | - | ||
| Knock Sensor (KS) | 20 | 177 | ||
| Mass Air Flow (MAF) sensor screw | 10 | 89 | ||
| PCM bolts | 8 | 71 | ||
| Power Steering Pressure (PSP) switch | 20 | 177 | ||
|
||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.