Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Ford Flex SEFACTORY OEM SERVICE PROCEDURE
Smart Junction Box (SJB)
SMART JUNCTION BOX (SJB) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Retrieved | Action |
|---|---|---|---|
| B2794 | 3rd Row Power Fold Circuit Failure | On-Demand | If the third row power-fold seats do not operate, Go to PINPOINT TEST AF
. If the third row power-fold seats do operate, REPAIR the Power-Fold Seat Module (PFSM) enable circuit CPS58 (WH/BN) for a short to voltage. CLEAR the DTCs. REPEAT the self-test. TEST the system for normal operation. |
| B2A2D | 3rd Row Power Fold Circuit Short to Ground | On-Demand and Continuous | Go to PINPOINT TEST AF . |
| All Other DTCs | - | - | REFER to MULTIFUNCTION ELECTRONIC MODULE article. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
