Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Ford Flex SEFACTORY OEM SERVICE PROCEDURE
Front Display Interface Module (FDIM) - Without Navigation
FRONT DISPLAY INTERFACE MODULE (FDIM) - WITHOUT NAVIGATION DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B1318 | Battery Voltage Low | GO to PINPOINT TEST AJ . |
| B1342 | ECU is Faulted |
NOTE:
Repair all other DTCs before diagnosing DTC B1342. CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is the only DTC retrieved, INSTALL a new Front Display Interface Module (FDIM). REFER to FRONT DISPLAY INTERFACE MODULE (FDIM)
in this service information. REPEAT the self-test. |
| B2477 | Module Configuration Failure | REFER to MODULE COMMUNICATIONS NETWORK - MODULE CONFIGURATION article |
| U0140 | Lost Communication With Body Control Module (GEM ) | GO to PINPOINT TEST AE . |
| U0155 | Lost Communication With Instrument Panel Cluster (IC ) Control Panel | GO to PINPOINT TEST AS . |
| U0164 | Lost Communication With HVAC Control Module (EATC ) | GO to PINPOINT TEST BA . |
| U0184 | Lost Communication With Radio (ACM ) | GO to PINPOINT TEST AT . |
| U0196 | Lost Communication With Entertainment Control Module - Rear (AUX) | GO to PINPOINT TEST AU . |
| U0197 | Lost Communication With Telephone Control Module | GO to PINPOINT TEST AQ . |
| U0238 | Lost Communication With Digital Audio Control Module "D" (DSP ) | GO to PINPOINT TEST AR . |
| U2050 | No Application Present | REFER to MODULE COMMUNICATIONS NETWORK - MODULE CONFIGURATION article. |
| U2051 | One or More Calibration Files Missing/Corrupt | REFER to MODULE COMMUNICATIONS NETWORK - MODULE CONFIGURATION article. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.