Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Ford Flex SEFACTORY OEM SERVICE PROCEDURE
Component testing procedure
WARNING: This page is about a different car, the 2011 Ford Transit Connect. However, it is still accessible from the selected car via links, so may be relevant.
MASTER WINDOW CONTROL SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Driver front window circuit | 2, C3293A and 7, C3293A 3, C3293A and 1, C3293A |
Up | Closed circuit |
| Down | Open circuit | ||
| 2, C3293A and 1, C3293A 6, C3293A and 7, C3293A |
Up | Open circuit | |
| Down | Closed circuit | ||
| 6, C3293A and 7, C3293A 3, C3293A and 1, C3293A |
Rest | Closed circuit | |
| Passenger front window circuit | 2, C3293B and 1, C3293B 3, C3293B and 7, C3293B |
Up | Closed circuit |
| Down | Open circuit | ||
| 6, C3293B and 1, C3293B 2, C3293B and 7, C3293B |
Up | Open circuit | |
| Down | Closed circuit | ||
| 6, C3293B and 1, C3293B 3, C3293B and 7, C3293B |
Rest | Closed circuit |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.