Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Ford Fiesta SES, StandardFACTORY OEM SERVICE PROCEDURE
Front Control/Display Interface Module (FCDIM)
FRONT CONTROL/DISPLAY INTERFACE MODULE (FCDIM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B10BD:11 | Multifunctional Switch: Circuit Short to Ground | Go to PINPOINT TEST D . |
| B10BD:13 | Multifunctional Switch: Circuit Open | Go to PINPOINT TEST D . |
| B10BD:23 | Multifunctional Switch: Signal Stuck Low | Go to PINPOINT TEST D . |
| U0010:88 | Medium Speed CAN Communication Bus: Bus Off | Refer to MODULE COMMUNICATIONS NETWORK . |
| U0074:88 | Control Module Communication Bus "B" Off: Bus Off | Refer to MODULE COMMUNICATIONS NETWORK . |
| U1A00:00 | Private Communication Network: No Sub Type Information | Go to PINPOINT TEST Y . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | Go to PINPOINT TEST P . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | Go to PINPOINT TEST U . |
| U0193:00 | Lost Communication With "Digital Audio Control Module A": No Sub Type Information | Go to PINPOINT TEST X . |
| U0423:68 | Invalid Data Received From Instrument Panel Cluster Control Module: Event Information | RETRIEVE and FOLLOW other DTCs present in the FCDIM or IPC . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | PROGRAM the FCDIM . Refer to the Programmable Module Installation (PMI) procedure in MODULE CONFIGURATION . TEST the system for normal operation. |
| U3000:00 | Control Module: No Sub Type Information | INSTALL a new FCDIM . Refer to FRONT CONTROLS/DISPLAY INTERFACE MODULE (FCDIM) in this information. TEST the system for normal operation. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | Go to PINPOINT TEST AE . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | Go to PINPOINT TEST AF . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.