Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Ford Explorer Base, AWD, 6F55FACTORY OEM SERVICE PROCEDURE
Exploded View
STEERING COLUMN SHAFT PARTS DESCRIPTION CHART
| Item | Service Part Number | Description | Tool Number | Material Name | Notes |
|---|---|---|---|---|---|
| 1 | 3C611 | Dash seal | - | - | - |
| 2 | W714878 | Steering column shaft-to-steering column bolt | - | - | 26 Nm (19 lb-ft) |
| 3 | W705460 | Dash seal nut (3 required) | - | - | 9 Nm (80 lb-in) |
| 4 | 3B676 | Steering column shaft | - | - | - |
| 5 | W712961 | Steering column shaft-to-steering gear bolt | - | - | 26 Nm (19 lb-ft) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.