2011 Ford Expedition EL RWDFACTORY OEM SERVICE PROCEDURE

Module Communication Network - Module Configuration DTCS

MODULE COMMUNICATION NETWORK - MODULE CONFIGURATION DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Source Action
B2477 Module Configuration Failure
  • ABS module
  • Audio Control Module (ACM)
  • Audio Rear Control Unit (RCU)
  • Driver Seat Module (DSM)
  • Dual Climate Controlled Seat Module (DCSM)
  • Instrument Cluster (IC)
  • Parking Aid Module (PAM) - Expedition
  • Restraints Control Module (RCM)
  • Satellite Digital Audio Receiver System (SDARS) module
  • Smart Junction Box (SJB)
Carry out PMI  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
B2477 Module Configuration Failure
  • Accessory Protocol Interface Module (APIM)
Carry out APIM  programming. Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this information.
B2477 Module Configuration Failure PAM  - Navigator INSTALL a new PAM  . Refer to PARKING AID .
B2477 Module Configuration Failure
  • Vehicle Dynamics Module (VDM)
INSTALL a new VDM  . Refer to VEHICLE DYNAMIC SUSPENSION .
B2900 Vehicle Identification Number (VIN) mismatch
  • ABS module
  • RCM 
Carry out PMI  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
P0602 Powertrain Control Module Programming Error
  • PCM
Carry out PMI  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
P0605 Internal Control Module Read Only Memory (ROM  ) Error
  • PCM
Carry out PMI  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
P0605 Internal Control Module Read Only Memory (ROM  ) Error
  • Transmission Control Module (TCM)
INSTALL a new TCM  . Refer to AUTOMATIC TRANSMISSION - 6R80 .
P1639 Vehicle ID Block Corrupted, Not Programmed
  • PCM
Carry out PMI  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
U0300 Internal Control Module Software Incompatibility
  • PCM
  • RCM 
Carry out PMI  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
U201A:51 Control Module Main Calibration Data: Missing Calibration
  • ACM 
  • Audio Digital Signal Processing (DSP) module
Carry out PMI  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
U2050 No Application Present
  • ABS module
  • ACM 
  • Audio RCU 
  • DCSM 
  • DSM 
  • IC 
  • PAM 
  • PCM
  • RCM 
  • SDARS  module
  • SJB 
  • TCM 
Carry out PMI  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
U2050 No Application Present 4X4 control module INSTALL a new 4X4 control module. Refer to FOUR WHEEL DRIVE (4WD) SYSTEMS .
U2050 No Application Present
  • APIM 
Carry out APIM  programming. Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this information.
U2050 No Application Present
  • HVAC module
INSTALL a new HVAC module. Refer to CLIMATE CONTROL .
U2050 No Application Present
  • Liftgate/Trunk Module (LTM)
INSTALL a new LTM  . Refer to BODY PANEL SYSTEM - BODY CLOSURES .
U2050 No Application Present
  • Power Running Board (PRB) module
INSTALL a new PRB module. Refer to EXTERIOR TRIM & ORNAMENTATION .
U2050 No Application Present
  • VDM 
INSTALL a new VDM  . Refer to VEHICLE DYNAMIC SUSPENSION .
U2051 One or More Calibration Files Missing/Corrupt
  • ACM 
  • IC 
  • PAM  - Expedition
  • PCM
  • RCM 
Carry out PMI  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
U2051 One or More Calibration Files Missing/Corrupt
  • LTM 
INSTALL a new LTM  . Refer to BODY PANEL SYSTEM - BODY CLOSURES .
U2051 One or More Calibration Files Missing/Corrupt
  • PAM  - Navigator
INSTALL a new PAM  . Refer to PARKING AID .
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • ACM 
  • Audio DSP  module
Carry out PMI  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • APIM 
Carry out APIM  programming. Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this information.
U2101:00 Initial Configuration Incompatible: No Sub Type Information
  • APIM 
Carry out APIM  programming. Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this information.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.