2011 Ford Expedition EL RWDFACTORY OEM SERVICE PROCEDURE

Module Configuration and Parameter Chart

MODULE CONFIGURATION AND PARAMETER CHART

Module Requires PMI  Reprogram/Flash Capable Requires Adaptive Learning or Calibration Available Programmable Parameters
4X4 control module No Yes No None
ABS module Yes Yes
  • Interactive vehicle dynamics initialization
 None
Accessory Protocol Interface Module (APIM) Yes Yes No None
Audio Control Module (ACM) Yes Yes No
  • Analog clock display
  • MyKey™ (if equipped)
Audio Digital Signal Processing (DSP) module Yes Yes No None
Audio Rear Control Unit (RCU) Yes Yes No None
Driver Seat Module (DSM) Yes Yes No
  • Easy entry/exit
  • Power mirrors
Dual Climate Controlled Seat Module (DCSM) Yes Yes No
  • High cool blower voltage
Global Positioning System Module (GPSM) No Yes No None
HVAC module No Yes No None
Instrument Cluster (IC) Yes Yes No
  • Autolock feature
  • Auto-unlock feature
  • Belt-Minder®
  • Easy entry/exit
  • Gallon display type
  • Language
  • Metric display type
  • Oil life warning threshold
  • Outside air units
  • Overspeed warning
  • Reverse warning chime
Liftgate/Trunk Module (LTM) No Yes No None
Parking Aid Module (PAM) - Expedition No No No None
PAM - Navigator No No No None
PCM Yes Yes
  • Adaptive airflow
  • Idle speed
  • Refueling event
  • Fuel trim
  • Speed control enable/disable
Power Running Board (PRB) module No Yes No None
Restraints Control Module (RCM) Yes Yes No
  • Driver seat Belt-Minder® activation
  • Passenger seat Belt-Minder® activation
Satellite Digital Audio Receiver System (SDARS) module Yes Yes No None
Smart Junction Box (SJB) Yes Yes
  • Tire Pressure Monitoring System (TPMS) sensor calibration
  • Autolock feature
  • Auto-unlock feature
  • Daytime Running Lamps (DRL) present
  • Fog lamps present
  • Locking horn feedback
  • Locking light feedback
  • Police dark car feature
  • Remote Keyless Entry (RKE) feature
  • Smart unlocking feature
  • Tire placard pressure
Transmission Control Module (TCM) Yes No No None
Vehicle Dynamics Module (VDM) No No No None
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.