2011 Ford Escape Hybrid, AWDFACTORY OEM SERVICE PROCEDURE

Module Configuration DTCS

DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Source Action
B2477 Module Configuration Failure
  • ABS module (without Hybrid)
  • Audio Control Module (ACM) (without navigation)
  • HVAC module (without Hybrid)
  • Front Display Interface Module (FDIM)
  • Instrument Cluster (IC)
  • Power Steering Control Module (PSCM)
  • Smart Junction Box (SJB) (without Hybrid)
 CARRY OUT Programmable Module Installation (PMI). REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
B2900 VIN  Mismatch
  • ABS module (without Hybrid)
 CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
P0602 Powertrain Control Module Programming Error
  • PCM
 CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
P0605 Internal Control Module Read Only Memory (ROM  ) Error
  • PCM
 CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
P1635 Tire/Axle Out of Acceptable Range
  • PCM
 CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
P1639 Vehicle ID Block Corrupted, Not Programmed
  • PCM
 CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U0300 Internal Control Module Software Incompatibility
  • Battery Control Module - High Voltage Traction Battery (BCM-HVTB)
  • HVAC module (without Hybrid)
  • PCM
 CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U0300: 00 Internal Control Module Software Incompatibility: No Sub Type Information
  • Restraints Control Module (RCM)
 CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U0300: 51 Internal Control Module Software Incompatibility: Not Programmed
  • ABS module (Hybrid)
 CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U201A: 51 Control Module Main Calibration Data: Not Programmed
  • ACM  (with navigation)
  • Front Controls Interface Module (FCIM)
 CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2050 No Application Present
  • 4X4 control module
  • ABS module (without Hybrid)
  • ACM  (without navigation)
  • BCM-HVTB 
  • HVAC module (without Hybrid)
  • FDIM 
  • IC 
  • Occupant Classification System Module (OCSM)
  • SJB 
  • Transmission Control Module (TCM)
 CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2051 One or More Calibration Files Missing/Corrupt
  • 4X4 control module
  • ACM  (without navigation)
  • HVAC module (without Hybrid)
  • FDIM 
  • OCSM 
 CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2100: 00 Initial Configuration Not Complete: No Sub Type Information
  • ACM  (with navigation)
  • ABS module (Hybrid)
  • RCM 
 CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2100: 00 Initial Configuration Not Complete: No Sub Type Information
  • Accessory Protocol Interface Module (APIM)
 CARRY OUT APIM  programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this service information.
U2100: 56 Initial Configuration Not Complete: Invalid/Incompatible Configuration
  • ABS module (Hybrid)
 CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2101: 00 Control Module Configuration Incompatible: No Sub Type Information
  • ACM (with navigation)
 CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2101: 00 Control Module Configuration Incompatible: No Sub Type Information
  • APIM 
 CARRY OUT APIM  programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this service information.
U2200: 00 Control Module Configuration Memory Corrupt: No Sub Type Information
  • RCM 
 INSTALL a new RCM  . REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U3000: 46 Control Module: Calibration/Parameter Memory Failure
  • RCM 
 INSTALL a new RCM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U3002: 62 Vehicle Identification Number: Signal Compare Failure
  • ABS module (Hybrid)
  • RCM 
 CARRY OUT PMI  . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.