2011 Ford Edge SE, AWDFACTORY OEM SERVICE PROCEDURE

Steering Column Control Module (SCCM)

STEERING COLUMN CONTROL MODULE (SCCM) DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Action
B1007:09 High-Beam Headlamp Switch: Component Failure INSTALL a new multifunction switch. REFER to STEERING COLUMN SWITCHES . TEST the system for normal operation.
If the concern still exists, INSTALL a new SCCM  . REFER to STEERING COLUMN SWITCHES . TEST the system for normal operation.
B1D36:09 Turn Indicator Switch: Component Failure INSTALL a new multifunction switch. REFER to STEERING COLUMN SWITCHES . TEST the system for normal operation.
If the concern still exists, INSTALL a new SCCM  . REFER to STEERING COLUMN SWITCHES . TEST the system for normal operation.
All other DTCs - REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.