Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2011EDGE AWD V6-3.5LREPAIR AND DIAGNOSISBODY AND FRAMELOCKSKEYLESS ENTRYKEYLESS ENTRY TRANSMITTERTESTING AND INSPECTIONREMOTE MEMORY ACTIVATION
2011 Ford Edge AWD V6-3.5L
Remote Memory Activation
2011 Ford Edge AWD V6-3.5LSECTION Remote Memory Activation
Remote Memory Activation
1. Position the driver seat and exterior mirror to the desired positions.
2. Press and hold either memory button (1 or 2) for 5 seconds. A tone will be heard after about 2 seconds confirming the memory position has been set. Continue to hold until a second tone is heard after 5 seconds.
3. Within 3 seconds, press the LOCK button on the Remote Keyless Entry (RKE) transmitter.
4. Wait 10 seconds, then press the UNLOCK button.
5. If a second memory setting is desired, repeat the procedure for the second memory button and the second RKE (Remote Keyless Entry) transmitter.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.