Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010TAURUS SEL, FWDREPAIR AND DIAGNOSISQUICK LOOKUPSDTC INDEXSEATING DTCSDRIVER SEAT MODULE (DSM) DTC CHART
2010 Ford Taurus SEL, FWD
Driver Seat Module (DSM) DTC Chart
2010 Ford Taurus SEL, FWDSECTION Driver Seat Module (DSM) DTC Chart
DRIVER SEAT MODULE (DSM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Retrieved | Action |
|---|---|---|---|
| B1317 | Continuous | Battery Voltage High | Go To PINPOINT TEST AV . |
| B1318 | Continuous | Battery Voltage Low | Go To PINPOINT TEST AV . |
| B1342 | ECU Is Faulted | On-Demand and Continuous | INSTALL a new Driver Seat Module (DSM). REFER to MULTIFUNCTION ELECTRONIC MODULES . |
| B1663 | Seat Driver Front Up/Down Motor Stalled | On-Demand | If the motor does not operate without massage Go To PINPOINT TEST M , with massage Go To PINPOINT TEST O . If the motor operates in one second intervals, without massage Go To PINPOINT TEST N , with massage Go To PINPOINT TEST P . |
| B1664 | Seat Driver Rear Up/Down Motor Stalled | On-Demand | If the motor does not operate without massage Go To PINPOINT TEST M , with massage Go To PINPOINT TEST O . If the motor operates in one second intervals without massage Go To PINPOINT TEST N , with massage Go To PINPOINT TEST P . |
| B1665 | Seat Driver Forward/Backward Motor Stalled | On-Demand | If the motor does not operate without massage Go To PINPOINT TEST M , with massage Go To PINPOINT TEST O . If the motor operates in one second intervals without massage Go To PINPOINT TEST N , with massage Go To PINPOINT TEST P . |
| B1666 | Seat Driver Recline Motor Stalled | On-Demand | If the motor does not operate without massage Go To PINPOINT TEST M , with massage Go To PINPOINT TEST O . If the motor operates in one second intervals without massage Go To PINPOINT TEST N , with massage Go To PINPOINT TEST P . |
| B1703 | Seat Driver Recline Forward Switch Circuit Short to Battery | On-Demand and Continuous | Without massage Go To PINPOINT TEST M , with massage Go To PINPOINT TEST O . |
| B1707 | Seat Driver Recline Rearward Switch Circuit Short to Battery | On-Demand and Continuous | Without massage Go To PINPOINT TEST M , with massage Go To PINPOINT TEST O . |
| B1711 | Seat Driver Front Up Switch Circuit Short to Battery | On-Demand and Continuous | Without massage Go To PINPOINT TEST M , with massage Go To PINPOINT TEST O . |
| B1715 | Seat Driver Front Down Switch Circuit Short to Battery | On-Demand and Continuous | Without massage Go To PINPOINT TEST M , with massage Go To PINPOINT TEST O . |
| B1719 | Seat Driver Forward Switch Circuit Short to Battery | On-Demand and Continuous | Without massage Go To PINPOINT TEST M , with massage Go To PINPOINT TEST O . |
| B1723 | Seat Driver Rearward Switch Circuit Short to Battery | On-Demand and Continuous | Without massage Go To PINPOINT TEST M , with massage Go To PINPOINT TEST O . |
| B1727 | Seat Driver Rear Up Switch Circuit Short to Battery | On-Demand and Continuous | Without massage Go To PINPOINT TEST M , with massage Go To PINPOINT TEST O . |
| B1731 | Seat Driver Rear Down Switch Circuit Short to Battery | On-Demand and Continuous | Without massage Go To PINPOINT TEST M , with massage Go To PINPOINT TEST O . |
| B1952 | Seat Rear Up/Down Position Feedback Circuit Short to Battery | On-Demand and Continuous | Without massage Go To PINPOINT TEST N , with massage Go To PINPOINT TEST P . |
| B1953 | Seat Rear Up/Down Position Feedback Circuit Short to Ground | On-Demand and Continuous | Without massage Go To PINPOINT TEST N , with massage Go To PINPOINT TEST P . |
| B1956 | Seat Front Up/Down Position Feedback Circuit Short to Battery | On-Demand and Continuous | Without massage Go To PINPOINT TEST N , with massage Go To PINPOINT TEST P . |
| B1957 | Seat Front Up/Down Position Feedback Circuit Short to Ground | On-Demand and Continuous | Without massage Go To PINPOINT TEST N , with massage Go To PINPOINT TEST P . |
| B1960 | Seat Recline Forward/Backward Position Feedback Circuit Short to Battery | On-Demand and Continuous | Without massage Go To PINPOINT TEST N , with massage Go To PINPOINT TEST P . |
| B1961 | Seat Recline Forward/Backward Position Feedback Circuit Short to Ground | On-Demand and Continuous | Without massage Go To PINPOINT TEST N , with massage Go To PINPOINT TEST P . |
| B1964 | Seat Horizontal Forward/Rearward Position Feedback Circuit Short to Battery | On-Demand and Continuous | Without massage Go To PINPOINT TEST N , with massage Go To PINPOINT TEST P . |
| B1965 | Seat Horizontal Forward/Rearward Position Feedback Circuit Short to Ground | On-Demand and Continuous | Without massage Go To PINPOINT TEST N , with massage Go To PINPOINT TEST P . |
| B2477 | Module Configuration Failure | Continuous |
NOTE:
This DTC indicates PMI
has not been done to a newly installed module or configuration data has been lost. Presence of this DTC alone does not prevent basic seat operation from the seat control switch. CARRY OUT Programmable Module Installation (PMI) on the DSM
. REFER to
MODULE CONFIGURATION
. REPEAT the self-test. If PMI
is successful, the DTC will not be present. |
| U2050 | No Application Present | Continuous | INSTALL a new DSM . REFER to MULTIFUNCTION ELECTRONIC MODULES . REPEAT the self-test. |
| All Other DTCs | - | On-Demand and Continuous | REFER to the Master DTC Chart in MULTIFUNCTION ELECTRONIC MODULES . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.