2010 Ford Taurus Limited, FWDFACTORY OEM SERVICE PROCEDURE

Module Configuration and Parameter Chart

MODULE CONFIGURATION AND PARAMETER CHART

Module Module Address Requires PMI  Reprogram/Flash Capable Requires Adaptive Learning or Calibration Available Programmable Parameters
4X4 control module 761 No No No None
ABS module 760 Yes Yes No
  • Adaptive cruise control configuration
  • Fuel type
  • Tire size
Accessory Protocol Interface Module (APIM) 7D0 Yes Yes No None
Audio Control Module (ACM) 727 Yes Yes No None
Audio Digital Signal Processing (DSP) module 783 Yes Yes No None
Cruise-Control Module (C-CM) 764 No No No None
Driver Door Module (DDM) 740 Yes Yes No None
Driver Seat Module (DSM) 744 Yes Yes No
  • Easy entry/exit
Dual Climate Controlled Seat Module (DCSM) 776 Yes Yes No None
Front Controls Interface Module (FCIM) 7A7 No No No None
Front Display Interface Module (FDIM) 7A6 Yes Yes No None
Global Positioning System Module (GPSM) 701 No No No None
Headlamp Control Module 2 (HCM-2) 7C3 Yes Yes No
  • Auto high beam sensitivity
Head Up Display (HUD) module 7B2 No No No None
HVAC module 733 No No No None
Interior Lighting Control Module (ILCM) 7B5 Yes Yes No None
Instrument Panel Cluster (IPC) 720 Yes Yes No None
Occupant Classification System Module (OCSM) 765 No No
  • Seat weight sensor rezero
 None
Parking Aid Module (PAM) 736 Yes Yes No None
PCM 7E0 Yes Yes
  • Adaptive airflow
  • Idle speed
  • Refueling event
  • Fuel trim
 None
Power Steering Control Module (PSCM) 730 Yes Yes No None
Restraints Control Module (RCM) 737 Yes Yes
  • Seat weight sensor rezero
  • Emergency call present
  • Driver Belt-Minder®
  • Passenger Belt-Minder®
Remote Function Actuator (RFA) module 731 Yes Yes No
  • Auto locking
  • Auto unlocking
  • Perimeter lighting feature
  • Unlock sequence
Side Obstacle Detection Control Module - Left (SOD-L) 7C4 Yes Yes No None
Side Obstacle Detection Control Module - Right (SOD-R) 7C6 Yes Yes No None
Smart Junction Box (SJB) 726 Yes Yes
  • Tire Pressure Monitoring System (TPMS) sensor calibration
  • Autolamps delay time
  • Auto locking (without RFA  )
  • Auto unlocking (without RFA  )
  • Daytime Running Lamps (DRL) present
  • Global open
  • Perimeter lighting feature
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.