Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Ford Flex SEFACTORY OEM SERVICE PROCEDURE
DTC Chart
NOTE:
Some modules on this vehicle utilize a 5-character DTC followed by a 2-character failure-type code. The failure-type code provides information about specific fault conditions such as opens, or shorts to ground. Continuous memory DTCs have an additional 2-character DTC status code suffix to assist in determining DTC history.
DTC CHART
| DTC | Description | Source | Action |
|---|---|---|---|
| B2477 | Module Configuration Failure | ABS module Audio Control Module (ACM) Driver Seat Module (DSM) Dual Climate Controlled Seat Module (DCSM) Front Display Interface Module (FDIM) Instrument Cluster (IC) Rear Entertainment Module (RETM) Smart Junction Box (SJB) |
CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| B2900 | VIN Mismatch | 4X4 control module | The PCM Vehicle Identification Number (VIN) is not correct. CARRY OUT Programmable Module Installation (PMI) for the PCM. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| B2900 | VIN Mismatch | ABS module | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| P0602 | Powertrain Control Module Programming Error | PCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| P0605 | Internal Control Module Read-Only Memory (ROM ) Error | PCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| P1639 | Vehicle ID Block Corrupted, Not Programmed | PCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U0300 | Internal Control Module Software Incompatibility | PCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U201A:51 | Control Module Main Calibration Data: Missing Calibration | Front Controls Interface Module (FCIM) | Refer to DIAGNOSIS AND TESTING . |
| U201A:51 | Control Module Main Calibration Data: Missing Calibration | ACM Audio Digital Signal Processing (DSP) module | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U2050 | No Application Present | 4X4 control module | Refer to FOUR WHEEL DRIVE (4WD) SYSTEMS . |
| U2050 | No Application Present | ABS module ACM DCSM DSM FDIM IC RCM RETM SJB |
CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U2050 | No Application Present | Liftgate/Trunk Module (LTM) | Refer to BODY CLOSURES . |
| U2050 | No Application Present | Occupant Classification System Module (OCSM) DCSM |
Refer to DIAGNOSIS AND TESTING . |
| U2051 | One or More Calibration Files Missing/Corrupt | 4X4 control module | Refer to FOUR WHEEL DRIVE (4WD) SYSTEMS . |
| U2051 | One or More Calibration Files Missing/Corrupt | ACM IC FDIM |
CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U2051 | One or More Calibration Files Missing/Corrupt | LTM | Refer to BODY CLOSURES . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | ACM Audio DSP module Power Steering Control Module (PSCM) Restraints Control Module (RCM) |
CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | Accessory Protocol Interface Module (APIM) | CARRY OUT APIM programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | ACM Audio DSP module PSCM |
CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | APIM | CARRY OUT APIM programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING . |
| U3000:41 | Control Module: General Checksum Failure | Parking Aid Module (PAM) | Refer to PARKING AID . |
| U3000:41 | Control Module: General Checksum Failure | HVAC module | Refer to CLIMATE CONTROL SYSTEM - GENERAL INFORMATION AND DIAGNOSTICS . |
| U3000:46 | Control Module: Calibration/Parameter Memory Failure | PAM RCM |
CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U3000:54 | Control Module: Missing Calibration | PAM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
| U3000:55 | Control Module: Not Configured | HVAC module | Refer to CLIMATE CONTROL SYSTEM - GENERAL INFORMATION AND DIAGNOSTICS . |
| U3002:62 | Vehicle Identification Number: Signal Compare Failure | RCM | CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.