Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Ford Edge Limited, FWDFACTORY OEM SERVICE PROCEDURE
Starting System DTCS
PCM DTC List
| DTC | Description | Action |
|---|---|---|
| P0512 | Starter Request Circuit - Circuit has Power With the Ignition in the OFF Position | CARRY OUT the Ignition Switch Component Test. Refer to COMPONENT TESTING for component testing. If necessary, INSTALL a new ignition switch. If the ignition switch passed the component test, REPAIR circuit CDC35 (BU/WH) for a short to power. |
| P0705 | Transmission Range (TR) Sensor Circuit Failure | Refer to the appropriate Automatic Transmission article for the procedure. |
| P0706 | TR Sensor Range Failure | Refer to the appropriate Automatic Transmission article for the procedure. |
| P0708 | TR Sensor Circuit Failure | Refer to the appropriate Automatic Transmission article for the procedure. |
| P0709 | TR Sensor Range Failure | Refer to the appropriate Automatic Transmission article for the procedure. |
| P1260 | Theft Detected, Vehicle Immobilized | REFER to the DTC Chart in ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS . |
| P1702 | TR Sensor Circuit Failure | Refer to the appropriate Automatic Transmission article for the procedure. |
| P1705 | TR Sensor | Refer to the appropriate Automatic Transmission article for the procedure. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.